Brick layers scaffolding or Single scaffolding

If you're new to getting tattooed ask your questions here

Moderators: buttwheat, sidelvar, kohlhaas, EvilJay, Sphenoid, Freddie, CxCx

Post Reply
adtozhou
Posts: 23
Joined: Sat Oct 08, 2016 11:51 pm

Sun Oct 09, 2016 1:17 am

In this type of caffold Sale http://www.uscaffolding.com/, a series of vertical members made of bamboo or timber (named as Standards), are firmly fixed into the ground in a row parallel to the building wall. The distance in between two standards is generally kept within 2.4 to 3 m.

These standards are connected to each by a longitudinal horizontal member (named as Ledgers). Ledgers are tied with standards at every rise of 120 cm to150 cm (i.e. 4 ft to 5 ft). Rope lashing is used to tie the standard with ledgers.

The putlogs (or transverse horizontal members) are placed at a horizontal spacing of 120 cm such that one end is supported on the ledgers and the other end is held in the holes made in the wall. Rope lashing is used to fasten the putlogs with ledgers.

If the height of the scaffolding is very high, to maintain its stability, sometimes diagonal members (named as Braces) are provided Adjustable Ring Lock System http://www.uscaffolding.com/scaffolding ... ng-en.html. Braces are cross diagonally fitted with the standards using rope lashing.
Post Reply