Cuplock scaffolding component some common function

If you're new to getting tattooed ask your questions here

Moderators: buttwheat, sidelvar, kohlhaas, EvilJay, Sphenoid, Freddie, CxCx

Post Reply
adtozhou
Posts: 23
Joined: Sat Oct 08, 2016 11:51 pm

Sun Oct 09, 2016 1:23 am

Cuplock Scaffolding http://www.uscaffolding.com/ is composed of davit, cradle, pulley and etc. Davit can be fastened by inserting into upright pole in broad outrigger at the aim of elevating pole parts designed for pulley lifting small material. Mating the use with broad davit, it can jetting-out directory from the building. Overhang frame is composed of ram and jackstay by fastening them on building bracket with cuplock joint. It is applied to build overhang scaffolding without arranging embedded parts in wall structure.

Attentions on using Cuplock Scaffolding System http://www.uscaffolding.com/scaffolding ... ng-en.html

All member bars are forbidden to throw and should be hung along rope. Discharge lightly, place flatwise and pile up neatly by assortment. Go with scaffolding dismantling in the contrary direction against built. Parts should brush erosion resistant paint each two years. Clean them before brushing. Horizontal blade can go with renewal in case of distortion. These are what we should pay attention to in our daily application of scaffolding in construction.
Post Reply